Southern Oregon households entering the winter heating season face a widening range of costs for keeping their homes warm, with recent utility rate increases sharpening the financial comparison between electricity, natural gas, firewood and wood pellets.
Pacific Power raised Oregon residential electricity rates in April, while Avista Utilities increased residential natural gas rates approximately 8.5 percent effective October 31. Avista’s estimated monthly bill for a customer using 45 therms rose from $68.64 to $74.47. Pacific Power residential electricity costs are approximately 15 to 16 cents per kilowatt-hour under the pricing assumptions used in this comparison, although actual charges vary by customer and rate schedule.
The costliest heating choice is not necessarily the fuel with the highest unit price. The decisive figure is how much usable heat a system delivers for the money spent, and that measure puts newer heat pumps, efficient gas furnaces and inexpensive firewood in close competition.
Using 10 million British thermal units of heat delivered into a home as a common benchmark, a ductless electric heat pump would cost approximately $151 to operate at 15.5 cents per kilowatt-hour and an average efficiency factor of three. A 90-percent-efficient natural gas furnace would cost approximately $156 at an assumed $1.40 per therm.
A wood stove operating at 70 percent efficiency would cost approximately $170 using seasoned softwood purchased for $190 per full cord. A pellet stove at 80 percent efficiency would cost roughly $273 with pellets priced at $7 per 40-pound bag, including a small allowance for electricity. Conventional electric resistance heating would cost approximately $454 for the same delivered heat.
Those are illustrative fuel expenses, not forecasts of monthly bills. They exclude installation, maintenance, fuel delivery and fixed utility charges. Actual costs depend on rates, weather, home construction and equipment performance.
The difference between conventional electric heating and a modern heat pump is particularly striking. Electric baseboards, space heaters and standard electric furnaces turn purchased electricity directly into heat. A mini-split instead moves heat indoors, commonly delivering two to four units of warmth for each unit of electricity consumed under suitable conditions.
That efficiency can favor homes in Grants Pass, Medford and other relatively moderate Rogue Valley communities. Prolonged freezing weather in higher elevations and the Klamath Basin can reduce heat pump performance, although cold-climate models are designed for low temperatures. Installing a new system can cost several thousand dollars or more, limiting immediate savings for households whose existing equipment still works efficiently.
Natural gas remains competitive for homes already equipped with efficient furnaces. Older equipment consumes more fuel, and Avista customers also face fixed service charges. Disconnecting gas may remove those charges, but households using gas for water heating or cooking would face additional conversion costs.
Firewood can match or beat both technologies when the purchase price is low. Regional suppliers have advertised some softwood around $170 to $190 per cord. At $170 per cord, the estimated cost of delivering the benchmark amount of heat falls to about $152; at $300 per cord, it rises to approximately $268. Species, moisture content, seasoning and delivery all influence the real expense.
For residents with an existing certified stove and access to inexpensive, legally obtained seasoned wood, those numbers can favor traditional heating. Many freestanding stoves also continue operating during power outages. The trade-offs include hauling and storing fuel, chimney cleaning, safe ash disposal and compliance with local smoke restrictions. Wet wood and poorly maintained stoves can increase smoke and creosote hazards.
Pellet stoves offer automatic feeding and thermostatic control but do not necessarily lower fuel bills. Retail pellet costs can exceed the operating expense of gas or heat pumps, while augers and fans require electricity. Most pellet units need backup power to function during an outage.
Electric resistance systems remain the most expensive whole-house option in this comparison. A portable space heater may still reduce total spending when residents lower the main thermostat and heat only an occupied room, rather than adding the heater to an unchanged household heating load.
The home itself can shift the calculation as much as the heating equipment. A well-insulated 1,200-square-foot house with sealed doors, effective weatherstripping and adequate attic insulation may consume far less energy than a similar house with major air leaks. Ceiling height, thermostat settings and Southern Oregon’s varied winter temperatures further affect demand.
For households unable to afford a replacement furnace or heat pump, weatherization may provide savings at a lower initial cost. Owners with efficient existing gas systems or wood stoves also must weigh whether future fuel savings justify buying new equipment.
The regional cost comparison leaves no universal winner. Heat pumps and efficient natural gas furnaces are close competitors at the assumed rates; affordable seasoned firewood can be equally economical or cheaper. Pellets offer convenience at a potential premium, while conventional electric resistance heat carries the highest estimated operating cost.
As winter bills arrive, Southern Oregon residents face a choice shaped less by the label on the fuel than by the price paid, the equipment already installed and the heat their homes actually require.

